Kyo Martex Meeting Table

Kyo Martex Meeting Table

The modern Kyo Martex meeting table has simple forms that enhance the use of materials and the strong thickness of the tops. Kyo is characterised by its maximum customisation, thanks to the wide range of articles and finishes. It includes a wide variety of materials: from wood to lacquered, from glass to leather, from concrete to solid surface or Fenix. Available with 70 mm thick wooden legs in the same colour as the top, structural under-desk storage units or extra-clear glass legs for a suspended desk effect. Various options are available for electrification, such as cable grommets with socket in top finish, plug-in socket, chrome-plated cable grommet.

KYO MARTEX MEETING TABLE STRUCTURE:

Desk made with tops in:

• Wooden tops: made of 70 mm thick chipboard veneered with ajus veneer available in the finishes of the material sample book
• Matt lacquered tops: made of 70 mm thick MDF honeycomb sandwich board veneered with melamine paper and polyurethane primer, painted with matt embossed polyurethane paints.
• Leather or faux leather tops: made of 70 mm thick MDF honeycomb sandwich board, covered with melamine-coated paper and a polyurethane base and covered in leather or faux leather.
• Cristalplant tops: made of 65 mm thick chipboard covered with melamine-coated paper, covered with a 3 mm thick sheet of white Cristalplant (acrylic resin) both on the upper face and on the long side of the edges; the connection between the top and the edge is made with a quarter-tone joint.
• Top with front panel in leather and faux leather: made of 65 mm thick chipboard honeycomb faced with melamine paper and covered in the leather and faux leather shown in the sample book of materials
  
  

Legs available in:

• L-shaped wooden desk legs: made of 70 mm thick honeycomb chipboard veneered with ajus veneer in tobacco oak, walnut or classic oak finish with folding technology.
• L-shaped lacquered desk legs: made of 70 mm thick honeycomb chipboard veneered with melamine paper and polyurethane primer, painted with matte embossed polyurethane varnish, or with glossy brushed polyurethane varnish.
• L-shaped leather or faux leather desk legs: made of 70 mm thick MDF honeycomb sandwich board, melamine-coated with melamine paper and polyurethane base and covered in leather or faux leather.
• Bridge desk legs: the wooden version is made of plywood veneered with ajus precomposite in the finishes of the material swatch book; the lacquered version is made of plywood with a polyurethane base, painted with matt or gloss brushed embossed polyurethane varnishes.
• The leather and faux leather version is made of MDF honeycomb board, melamine-coated with melamine paper and polyurethane base and covered in leather or faux leather.
• Dattilo and bookcase with glass bases: the tops of the wooden version are made of 70 mm thick chipboard veneered with ajus precomposite in the catalogue finishes; the lacquered version is made of 70 mm thick MDF honeycomb sandwich board, faced with melamine paper and polyurethane base, painted with matte embossed or glossy brushed polyurethane varnishes. The bookcase sides and dactyl bases are made of 15 mm thick extra-clear tempered glass and packed in a wooden crate. The shelves are equipped with a glass locking mechanism.
• Trapezoidal leg: made of solid beech wood, it is available painted with black matte embossed polyurethane varnish; it is equipped with levelling feet and is fastened to the top by means of special metric-pitch screws.
• Electrifiable leg: the structure is made of 18-mm-thick fibreboard veneered with ajus precomposite in the finishes of the material sample book or melamine-coated paper, painted with matt embossed polyurethane varnish, or with glossy brushed polyurethane varnish. The structure is fixed to the top by means of brackets with metric-pitch screws. The removable panels have the same finish as the structure and are attached to the structure by means of special magnets.
• Pedestal legs: made of stainless steel with square base and 10x10 section column, equipped with access hole for cable passage.
• Glass bases: made of extra-clear transparent or lacquered 15 mm thick tempered glass and packed in a wooden crate. The tops are equipped with a glass locking mechanism.

View sample book of materials

Various options for the electrification of desk tops and meeting tables, e.g. various cable conducts, plug-in sockets, flippers and flip tops. Cable entry is via vertebra in the single leg or via electrified central leg. Please contact customer service for more information.

KYO MARTEX MEETING TABLE SIZES:

The available sizes are as follows:

MARTEX DELIVERY TIMES:

Estimated time for production and delivery of the product 6 working weeks from payment received.
In this period, deliveries by the manufacturing companies may be delayed.